DBT internal Soft Close Kitchen Drawer Box. This drawer can be used as a drawer to go behind an existing drawer or unit door. High quality drawer materials for a long-lasting drawer.

 Load capacity 35kg

Drawer front supplied.

Actual height

95mm high: Drawer sides outer height 95mm high, drawer front 105mm high, drawer once fitted in unit including runners 110mm high.

224mm high: Drawer sides outer height 180mm high including rail and acrylic, drawer front 224mm high, drawer once fitted in unit including runners 224mm high.

Stated depth of drawer is the depth from front to back of the outer drawer dimension selected. make sure there is at least 10mm tolerance from the depth of your unit to allow drawer to fit without protruding from the unit. 

Hinges info:

Selecting hinges means in the unit the drawer is going in has hinges attached to a door. If hinges selected 25mm packers are provided with order and 25mm/50mm deducted off drawer width depending if hinges 1 side or both sides. this is so the drawer can be used and not hit or scrape hinge attached to your unit. 

Hinges Selection:

• Hinge 1 side = -25mm off drawer width, 1x pair 25mm packers provided.
• Hinge both sides = -50mm off total drawer width and 2x pair packers provided.
• No hinges = drawer will fit normal unit size stated.

Drawer will come flat packed & includes:

• 1x pair DBT drawer sides left & right 95mm high.
• 1x pair runners with soft close built in mechanism. 
• 1x drawer base 18mm thick woodchip melamine titanium colour.
• 1x drawer back 18mm thick woodchip melamine titanium colour.
• 1x pair drawer back brackets left & right to attach to drawer sides & back of drawer.
• 2x rails for 224mm high only.
• 2x acrylic sides with holders for 224mm high only.
• 2x drawer front connector brackets.
• 1x drawer front panel 
• 2x drawer front attachments for drawer front panel. 
• 2x drawer front attachments for drawer front .
• 1x drawer front rail (for 224mm high only).
• 1x pair rectangle drawer screw cover caps labelled DBT.
• 2x MDF strips drawer depth x 50mm x 3mm (only to use if unit is 15mm).
• 1x bag of screw fixings to build and attach drawer to unit.
• 1x Fitting instructions. 

Bespoke sizes available in widths only. For any enquiries please click here

It is important that you take the correct measurements to ensure you order the correct drawer boxes. Below is a detailed illustration of how to measure your unit for a prefect fit of the drawer box. This is the same for both kitchen and bedroom drawer boxes.

You can follow this easy to use guide for measuring your drawer box.

Kitchen Drawer Box Step by Step:

1. To start, to find the depth, measure the front to the back of the unit.
2. To find the width, measure the outer to outer of the unit where you want the drawer box to go.
3. To find the height, you will measure your old drawer box.
   

Bedroom Drawer Boxes Step by Step:

1. To start, to find the depth, measure the front to the back of the unit.
2. To find the width, measure the outer to outer of the unit where you want the drawer box to go.
3. To find the height, you will measure your old drawer box. If, you do not have a drawer box measure the internal height.